Skip to product information
1 of 4

DESIGNED & MANUFACTURED IN THE UK

56mm x 187mm Fork Brace

56mm x 187mm Fork Brace

Regular price £187.95 GBP
Regular price Sale price £187.95 GBP
Sale Sold out
Taxes included. Shipping calculated at checkout.
Quantity

Click here for Fork Brace Installation Instructions

This fork brace has been designed & manufactured inhouse from high grade aluminium and is available in a variety of finishes.  This period style brace is ideally suited for those doing restoration projects, cafe racer builds or custom creations, taking over where the micron brace finished and adding our own unique style.  These braces are designed to be easy to fit and give the desired amount of stiffness back into the front end, helping with cornering and high speed wobbles.

This flat brace has 56mm leg clamps with 187mm stanchion centres 
It may fit many make and models so please check your sizes prior to ordering

Fitting Instructions

This fork brace should be installed by a competent person. If you are unsure about any part of the fitting process, please have it installed by a qualified motorcycle technician.

  1. Raise the dust caps
    Where fitted, lift the fork dust caps clear of the mounting area. The fork brace must not be clamped over the dust caps or boots.
  2. Position the leg clamps
    Remove the M6 clamp screws using a 5 mm Allen key. Fit each clamp around the fork stanchion and lower it into position at the top of the fork leg.
  3. Loosely secure the clamps
    Refit the screws and tighten them lightly, leaving enough movement to adjust the clamps. Keep the gaps on either side of each clamp as even as possible.
  4. Fit the top plate
    Position the top plate over the leg clamps and align the mounting holes. Insert all four M6 × 20 mm button-head screws using a 4 mm Allen key, tightening them lightly.
  5. Align and tighten
    Check that both leg clamps and the top plate sit evenly and squarely. Tighten the leg-clamp screws first, followed by the top-plate screws, using the appropriate torque setting below.
  6. Refit the dust caps or boots
    Return the dust caps or boots to their correct position.

Torque settings — M6 stainless steel bolts

Bolt condition Tightening torque
Dry 8.7 Nm
Lubricated 7.8 Nm

Photographs are for illustration only and may not show the exact model supplied.

View full details